Effect of the protonation level of poly(o-phenylenediamine) (PoPD) on the ac impedance of humidity-sensitive PoPD/poly(vinyl alcohol) composite film

A composite film consisting of poly(o-phenylenediamine) (PoPD) and poly(vinyl alcohol) (PVA) has been prepared, and the effect of the protonation level of PoPD on the response of the composite to humidity been investigated by ac impedance measurements. The electrochemical system of the PoPD/PVA composite in a humid atmosphere is represented by an electrochemical equivalent circuit containing film (R_film, C_film), Warburg (W) and interfacial (R_ct, C_dl) impedance. R_film was increased with decreasing protonation level of the PoPD in relative humidity regions higher than 40%, but it was almost independent of the protonation level in humidity regions lower than this percentage.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

Synthetic process to control the total size and component distribution of multilayer magnetic composite particles

A new synthetic process to prepare composite particles with multilayers, comprised of usual polymer latices, ultra-fine magnetic particles, and a polystyrene layer was examined under various solution conditions.First, the synthetic conditions of heterocoagulates, consisted of polystyrene latices (2a=180900 nm) and NiO·ZnO·Fe₂O₃ particles (2a=20 nm), were investigated as a function of medium pH, particle concentration, and particle size ratio, based on the concept of the heterocoagulation theory as applied by Harding et al. Regular heterocoagulates were generated under suitable medium and mixing conditions, and that their total size can be controlled by selecting the size of the original polymer latices used as the core.Second, the best encapsulation condition of the heterocoagulates via emulsion polymerization with polystyrene monomer was surveyed. The encapsulation of the heterocoagulates was greatly promoted by pretreatment with oleate molecules, although there is no tendency for the encapsulation when the surfactant-free bare heterocoagulates are used as the core.     

Electrochemistry of vanadium-doped tetragonal and monoclinic ZrO2 attached to graphite/polyester composite electrodes

The electrochemistry of monoclinic and tetragonal vanadium-doped zirconias (VZrO₂), prepared from gel precursors with vanadium loadings ranging from 0.5 to 15 mol%, has been studied using abrasive-conditioned graphite/polyester composite electrodes immersed in aqueous HCl and HClO₄ solutions. Isolated vanadium centers form a solid solution in the zirconia lattice with a solubility limit close to 5 mol%. Above 5 mol%, finely dispersed V₂O₅ is formed. Vanadium centers located at the boundary sites of the zirconia lattice display successive one-electron transfer processes near to +0.25 and +0.10 V vs. SCE, whereas finely dispersed V₂O₅ yields three successive reduction processes at +0.46, +0.30, and +0.16 V vs. SCE. Electrochemical data indicate the presence of both V⁵⁺ and V⁴⁺ centers in the lattice of monoclinic and tetragonal zirconias, the V⁵⁺/V⁴⁺ ratio decreasing as the vanadium loading increases. Electronic Publication     

Simultaneous Determination of Ascorbic Acid and Uric Acid by Using a PVC/TTF‐TCNQ Composite Electrode as Detector in a FIA System

A PVC/TTF‐TCNQ composite electrode has been employed as detector in a flow injection system. The proposed method allows the simultaneous detection of ascorbic acid (AA) and uric acid (UA) in mixtures by using a FIA system in a simple manner, without pre‐treatment or modified electrode. This method is based on the amperometric determination of (a) ascorbic acid at 0.15 V and (b) both analytes at 0.35 V, being the response linear in the range 1×10^?2–4×10^?4 M for both analytes with detection limits (S/N=3) of 1.2×10^?4 M and 8.1×10^?5 M for AA and UA, respectively.     

THE PREPARATION AND STUDY ON THE NANO-TiO2/SILK FIBROIN COMPOSITE FILMS BY THE SOL-GEL METHOD

Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)/nano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this effect on the characteristics of the formed materials. Samples were characterized by thermogravimetric analysis, X-ray diffractometry, UV, AFM and FT-IR spectroscopy.The experimental results reveal that, compared to the pure silk fibroin films, the mechanical strength of these regenerated SF/nano-TiO2 composite films were increased and the dissolubility in water of SF/nano-TiO2 composite films in aqueous solution were decreased. The diameter of nano-TiO2 particle films was about 80nm through UV and AFM. The nano-TiO2 particles were well dispersed in the regenerated silk fibroin. It was found that the crystal structures of the composite films were transited from typical Silk Ⅰ to typical Silk Ⅱ by the XRD and FTIR. Furthermore, the crystallinity of the composite films was obviously improved. Through the TGA, it was demonstrated that the heat transition temperature of composite films was also enhanced.     

连续碳纤维增强的聚芳醚酮在Ⅰ型循环载荷下的层间破坏

用双悬臂梁(DCB)试件研究了连续碳纤维增强的聚芳醚酮复合材料(CF/PEK-C),在Ⅰ型循环载荷作用下的层间裂纹扩展行为.循环载荷采用载荷控制模式,最小载荷与最大载荷之比为0.5.在疲劳试验中,仍然发现有“阻力曲线”现象存在.层间裂纹扩展速率用指数定律与相应的应变能释放速率联系起来,并对结果进行了讨论.     

ELECTRORHEOLOGICAL PROPERTIES OF POLYANILINE/PUMICE COMPOSITE SUSPENSIONS

Electrorheological （ER） properties of polyaniline （PAni）, pumice and polyaniline/pumice composites （PAPC） were investigated. Polyaniline and PAni/pumice composite were prepared by oxidative polymerization. PAni/pumice particlesbased ER suspensions were prepared in silicone oil （SO）, and their ER behavior was investigated as a function of shear rate, electric field strength, concentration and temperature. Sedimentation stabilities of suspensions were determined. It has been found that ER activity of all the suspensions increases with increasing electric field strength, concentration and decreasing shear rate. It has shown that the suspensions have a typical shear thinning non-Newtonian viscoelastic behavior. Yield stress of composite suspensions increased linearly with increasing applied electric field strength and with concentrations of the particles. The effect of high temperature on ER activity of purrfice/silicone oil systems was also investigated.     

TiO_2/PVDF复合中空纤维膜的制备和表征

采用相转化法制备了二氧化钛 (TiO2 ) 聚偏氟乙烯 (PVDF)复合中空纤维膜 .应用牛血清白蛋白截留实验、扫描电子显微镜、热重分析、X射线衍射分别对复合膜的分离性能、微观结构、热稳定性和晶相组成进行了分析 .结果表明复合膜的性能与纯PVDF膜的相比有显著的改善 ,其中对牛血清白蛋白的截留率从 3 2 7%提高到 86 6 7% ,单根纤维的断裂应力从 3 35MPa提高到 4 70MPa ,提高了 4 0 3% .氮气吸附实验测定的孔径分布进一步表明复合膜的孔径分布变窄 ,孔径变小 .     

Hydrothermal Synthesis and Thermal Stability of Natural Mineral Lindgrenite

IntroductionSynthesis of natural minerals is helpful for tracingthe geological origin of mineral formation and forverifying the quality of minerals. The investigations onthe conditions for mineral formation, such as pressure,temperature, and starting mate…